快速詳情
機器系統：澆注，計量，混合和鑄造
典型的Mateirals系統：TDI + MOCA / MDI + MOCA /預聚物+ MOCA / E-300
應用範圍：Pu棒，pu板，pu輥，工業pu零件等
詳細的產品描述
EA系列雙組分彈性體澆注機，加藥機，攪拌機
1.總結：
我們的pu鑄造注塑機是我公司遵循國際先進技術產品，從國外進口主要機械零件和知名品牌。因此，該設備的技術和安全性能已達到國外同期產品的先進水平。
本機用於生產鑄造聚氨酯彈性體產品，採用MOCA等材料作為增鏈劑，如膠輥，墊，電梯輥和高剛性產品，可在本機中組成預聚物和真空消泡。
可以瞬間切換不同的PU橡膠，生產不同材質的CPU。
2.設備的主要參數和說明
2.1類型：多組分PU鑄造機（可選）
2.2合適的發泡體系：Pu彈性體產品
2.3。黏度（CPS）：
A（POLYOL或預聚物）：~4000mpa.s（45℃-100℃）
B（MOCA）：10~1000 mpa.s（130℃）
2.4澆注輸出：2-10 kg / min（100：14），總共5scales可供選擇
混合比例範圍可調：100：6~100：20當原料密度和原料混合比不同時，有一些重量差異。
選項：可添加另一種成分用於顏料或試劑使用。
3.Techincal說明：
3.1坦克（A，B，坦克）
罐體材質：不銹鋼AISI 304
帶加熱夾克
最大容量：A220L B60L
有效容量：A160L，B45L
加熱系統：油再循環
溫度檢查：PT100傳感器。
最高溫度：130℃
溫度保持容差：+/- 1.5°C
攪拌機：不銹鋼材料，錨型
混合速度：根據不同的原料調整
檢查窗口：罐體內的玻璃窗
選項：電感器
輔助系統：
真空系統
氮氣灌裝系統
真空計
原料灌裝系統
原料真空吸收系統
原料卸料系統
3.2 Pipe
Material: PTFE reinforced stainless steel with mesh
Heating system: OIL heating
Max working pressure: 20 bar
最高溫度：130℃
Tolerance on the temperature holding: Within +/- 1°
These high flexibility insulation pipe can ensure the consistency of temperature in the whole pipeline.
3.3Metering system(A,B, components)
Metering pump: Gear pump from German
Delivery capacity of Metering pump: A 40cc/r, B 6cc/r
Filters: Highly filtering surface Stainless steel 304.
Motor:Converter in accordance with tachometer and motor to control the flow speed.
ALL the metering system and fliters keep under the tank and within the heating
The measurement system and filter in ovens, insulation material below. This design method can be pressurized tank in the wrong circumstances, to maintai
3.4 Mixing head
Material: High strength alloy
Speed: 0.0 to 6500 rpm.
Heating: Independent electrical heating Mixing by mixed-head match with the motor
Temperature check: Thermal sensor.
Tolerance on the temperature maintenance: +/- 1°C
Motor: Electric motors, controlled by a frequency convertor.
Our uniquely mixing head design has the following features: It can guarantee the accuracy of speed, and at a very low speed of the mixed quality of raw materials; so that the prepolymer does not cause pressure damage to properties.
Made of special alloy mechanical seal system made the mixing head also could work in the high anti-pressure, while ensuring the reliability of mixed system.
Unique design of the mixing chamber can be cleaned to ensure easy-to-use and thoroughness.
3.4.1 Injectors for A,B,
Material: high strength alloy
Injection system: injection pressure independent of each other
The heating system: independent electrical heating
Temperature measurement system: PT100 thermal sensor
Temperature error: control +/- 1°C
Each injection pressure control is independent of each other, can be adjust alone pressure casting and recycling pressure. The loop injection pressure will be tested by the head of sensor, and with pressure adjusting device. This control method can avoid every time before pouring out some materials must be mixed and the uneven.
4.Option: Auxiliary Metering and injection system: for color, foaming agent and additive agent and so on
Pump: Gear Pump
Metering accuracy: 0.3%.
Flow range: 0.006-0.06L/min
Metering accuracy : 0.3%.
Pressure check: Pressure transducer.
Tank capacity: 0.6L/2L
Motor: Electric managed by an inverter.
Injectors: Single for each auxiliary with independently adjustable injection pressure.
4. Cleaning system
Tank:20L Stainless steel
Control of Liquid :Visual glass window
Low position warning electronic equipment (OPTION)
Injector: Inject raw material to mixing head directly
The running speed and circulation of cleaning solution,air,mixing head are are independent control system,this can make them aximum cleaning effect.
In order to the maximize reduce consumption of cleaning, settings of each component can be pre-cleaning procedures. The casting machine Settings when suddenly loses power in the artificial emergency cleaning device. Cleaning solution should use non-flammable solvents, such as:DBEMC
leaning procedures. The casting machine Settings when suddenly loses power in the artificial emergency cleaning device. Cleaning solution should use non-flammable solvents, such as:DBEMC.
5． 3-component Polyurethane Low pressure machine,Foaming and pouring machineElectric Board and software
Electronic display design according to the EC criteria.
Software: The software system can control the machine to work and in the standby machine control.
Data in the user interface through the following procedures:
* Working state real After all the machine on real-time parameters can be displayed on the interface, such as temperature, pressure, pumping and mixing speed, security levels, alarm conditions and other procedures set by the parameters must be displayed.
* Formula design program
The major setting and save the formula interface ( depth, temperature, pressure, etc). For each formula can be set and save 20 subroutine, these subroutines can cast the first one near the selector out directly.
* Calibration interface
This interface is mainly used to automatically correct out of three different charge, by a balancer to determine quality.
The software also include some other systems, such as casting machine maintenance control, work time, data statistics and alarm records. Computer softw
6.Machine Size
Height: 1,600mm
Length: 2000mm
Width: 2,200mm
Length of injection handle: 1,300mm
Weight: 1,500kgs
7.Installation terms:
Vacuum pump: 40m3/h
Compressed air: Dry air 5/7 bars
Flow capacity: > 5 Nm3/hour
Power: 220V/380V – 50 Hz (3P+N+T)
Installation environment: No install in the workshop of any explosion
